Monocure Rapid 3D Resin 500mL Blue

Description

Our RAPID product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7.?The cure speed is up to 4 X faster than our standard resin.Feeling a little blue? The near solid blue appearance allows you to 3D print models or parts with a detailed smooth finish that will be blue in colour when cured.

Technical Data

All Monocure 3D resins have a very wide range of reactivity. UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators. monomers & sensitizers. almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a ‘Shore D Hardness Durometer’ and have a rating of 70. (A hard hat has a rating of 80)

The Viscosity of our resin is 500 – 600cps @ 25 C (Brookfield RVT).?

All our resins have a low odour. have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark. cool place out of direct sunlight.?

Click here to download 3D Blue Resin – RAPID (3DR3585B) Data Sheet

SDS

Click here to download Rapid Blue Resin (3DR3582C) MSDS

Confidentiality Notice: This document is confidential and contains proprietary information and intellectual property of Monocure Pty Ltd. Neither this document nor any of the information contained herein may be reproduced or disclosed under any circumstances without the express written permission of Monocure Pty Ltd. Please be aware that disclosure. copying. distribution. sharing or use of this document and the information contained therein is strictly prohibited.?

?Resin Porfile for Phrozen Shuffle: Click here

?

?