Bondtech WANHAO D6 Kit

Bondtech upgrade kit for Wanhao D6

This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament.

The housing parts are professionally SLS printed in polyamide for maximum strength and precision.

This extruder upgrade kit for the Wanhao Duplicator 6/Monoprice duplicator 6 will replace the original feeder.

It allows for a more reliable printing with all sorts of filaments. both stiff and flexibles and the DualDrive system ensures that the extruder never looses grip of the filament so grinding. slipping is a thing of the past.

The original motor are used and the PTFE feedtube is held securly in place with an industrial 4 mm Push-fit connector for reliability.

Installs in about half an hour with standard tools available.

E-steps needs to be updated to 415 and to avoid that the printhead collides with the rear frame the max movement needs to be reduced to 190 mm in the Y-direction. A new firmware is available for download with the necessary changes implemented.

On some printers the printhead has trouble reaching the Y-homing endstop before the front of the extruder collides with the frame. in order to solve this an o-ring is included that slides over the x-shaft that makes the endstop to be activated earlier. instructions of how to do this is available under the “”Installation guide”” tab.