Modix BIG-Meter 3D Printer

Modix BIG-Meter

Generation 4

Large Build Volume. Premium Components. Affordable Price
Print Volume of 1.010 x 1.010 x 1.010 mm

BIG-Meter Specifications

Improved Generation 4 Offering:

Generation 4 upgrades include: the new Griffin print head. IDEX compatible. increased print speeds. fully automated calibration and other now standard features to increase ease of use.

IDEX enables printing of models with internal geometries. provides high quality surface finish while reducing post processing time.

Griffin print head offers high printing quality. impact resist. easy-swap and higher printing temperatures than before.

Reliability sensors suite designed to save print-jobs on time. It can detect filament run-out. under extrusion and clogs.

Comprehensive set of automatic calibration tools including: bed tilt calibration. bed leveling. gantry alignment and Z offset calibration.

Professional Features

Tour The BIG-Meter

Key Features

Heavy Duty Design

High Strength Chassis

All Modix 3D printer chassis and frames are built using solid 40×40 T-Slot aluminum profiles. This high quality frame material gives you the rigidity necessary to print accurately and reliably over the entire build volume of even Modix’s biggest printers. A 3D printer is only as strong as its joints. and the Modix team knows it. All of the Modix large format 3D printers are held together with powder coated laser cut aluminum brackets & joints. These custom made pieces are capable of keeping every joint strong and square with every change of direction of the printhead.

• Solid 40X40 T-slot aluminum profiles
• Powder coated laser cut aluminum brackets and joints
• Enclosure C Closed enclosure made of 3mm black Aluminum Composite Panels (ACP). Enclosure is an optional add-on for BIG-60. BIG-120X & BIG-120Z and a default option for BIG-Meter and BIG-180X.

High Speed Motion System

Modix’s printers are now capable of printing significantly faster than before. Travel speed of up to 350 mm/s. and printing of up to 250 mm/s.

• HIWIN MGW9H linear guide rails
• Four Z ball screws for Z axis movement. 12mm diameter. 4mm pitch
• 9 mm width Gates GT2 timing belt. reinforced with fiberglass
• Motors: X & Z Axis: NEMA-23. Y Axis: NEMA-17
• Mechanical position accuracy: X-10 Micron. Y-10 Micron. Z-0.5 Micron
• Print speed (based on 0.4mm nozzle):
  Up to 100 mm/sec C normal quality
  Up to 250 mm/sec C draft / non functional infill
  Up to 350 mm/sec C travel
  Larger nozzles normally are required to print slower but provide parts much faster due to a reduced number of layers.

Improved Rigidity & Reduced Weight

Modix Generation 4 3D printers have been modified to support faster speeds. The lightning fast print speed has been made possible thanks to strong NEMA 23 motors on the X axis instead of NEMA-17 motors.

In addition. the weight has been reduced on the Y axis as the weight of one motor is split now into two independent ones. using the IDEX setup.

The Z axis been improved with CNC machined brackets that hold the bed firmly and at a higher level of accuracy.

Premium Print Bed

High quality. low-warp print beds are incredibly important for large format 3D printers. That is why Modix only sources incredibly high-quality parts for their printbeds.

• 6.35mm thick. Alcoa Mic6 milled cast aluminum plate. made in the USA.
• AC powered bed heater 1370 Watt (1.200 Watt for 110V users). Requires a dedicated independent 15A AC source.
• Dual heating zones. Inner 200X200mm size for small objects and lower power consumption.
• Max temperature C 110oc (with enclosure)
• Print surface C PEI film with 3M high temp adhesive sheet.

Removable Magnetic Bed

This add-on will greatly improve the user experience and save you time on a daily basis. Modix’s printers are delivered by default with a PEI sheet that releases the print once the bed is cooled down to room temperature. With the removable magnetic bed add-on. users do not need to wait or work hard with a spatula and can easily and immediately remove objects after completing the print job by simply bending the spring steel plate.

This add-on includes an adhesive magnetic sheet that should be fixed to the aluminum bed plate and a removable spring steel plate that should be placed on top of it.
The flexible spring steel plate can be printed on from both sides. One side is PEI powder coated providing textured bottom surface and the other side is serviced with a smooth PEI sheet providing a glossy bottom finish.

Another advantage is with maintenance. the PEI installed on the bed plate can degrade over time. Print removal with a spatula may result in unwanted scratches that later appear at the bottom of the printed object. Replacing the PEI on the removable spring steel or even buying a spare unit is much easier than removing it from the bed plate itself.

Designed with Safety in Mind

Included Enclosure

The enclosure helps to improve the printer stability providing higher quality print results. It captures the heat generated from the bed. creating a passively heated chamber. This heated chamber helps to reduce wrapping and cracks due to uneven part cooling.

Enclosure made of 3mm black Aluminum Composite Panels (ACP). Enclosure is a highly recommended add-on for the BIG-60. BIG-120X & BIG-120Z and a default option for BIG-Meter and BIG-180X.

Recent Improvements

The new Modix Generation 4 enclosure enjoys a fresh updated design and has been improved by adding the following features:

• Pneumatic top lid
• Rear maintenance opening hatch
• Sturdy door hinges
• Door and lid sealing strips
• Improved internal led lighting

Active Air Filter

The Modix Active Air Filter (MAAF) is an external air filter device. The filter cleanses the printers’ chamber by capturing micro-particles and gas fumes that are released from melted filament throughout the 3D printing process. MAAF provides a constant air cleansing process during the entire printing process. circulating the air in and out and back into the printer while cleaning it repeatedly.

Multi-layer filtering
A large fan inside the device draws the air from the printer through a flexible vent tube connected to the top of the device. The air is then guided through a set of three filters before it is circulated back into the printer.

The triple filter system includes:

• 1. Pre-Filter C Remove large dust particles from the air.
• 2. HEPA Filter C High-Efficiency Particulate Absorbing (HEPA) filter. composed of a mat of randomly arranged fiberglass fibers designed to capture tiny particles released during printing.
• 3. Active Carbon Filter C Clean the air from toxic fumes released during the 3D printing process.

Highly recommended

It is about your health!
Sub-micron particles and fumes released during the plastic melting process pose risk to your health. Therefore. every owner of a Modix 3D printer is strongly advised to install an air filter. Air filter is a MUST-HAVE add-on if you intend to print with any plastic beyond PLA. i.e. PETG. ABS Although common knowledge is that printing PLA in a well-ventilated room is fine. there is no clear definition of proper room ventilation and during the winter and summer times windows are normally closed.

Controlling the air speed
Frontal speed selector allows controlling the air flow speed. Running the filter on the lowest speed during the printing process will not affect the internal chamber temperature while providing effective filtering. By the end of the printing. you can set the speed for the highest option for a few minutes in order to ensure the complete chamber has been cleaned of any harmful additives opening the doors.

Spare Filters
Considering the daily use of the printer in a clean room. the HEPA/Carbon combo filters last from 6 to12 months and the pre-filter from 3 to 6 months. An alert indicator to change the is located on the front panel.

Active Air Filter

The Modix Active Air Filter (MAAF) is an external air filter device. The filter cleanses the printers’ chamber by capturing micro-particles and gas fumes that are released from melted filament throughout the 3D printing process. MAAF provides a constant air cleansing process during the entire printing process. circulating the air in and out and back into the printer while cleaning it repeatedly.

Multi-layer filtering
A large fan inside the device draws the air from the printer through a flexible vent tube connected to the top of the device. The air is then guided through a set of three filters before it is circulated back into the printer.

The triple filter system includes:

• 1. Pre-Filter C Remove large dust particles from the air.
• 2. HEPA Filter C High-Efficiency Particulate Absorbing (HEPA) filter. composed of a mat of randomly arranged fiberglass fibers designed to capture tiny particles released during printing.
• 3. Active Carbon Filter C Clean the air from toxic fumes released during the 3D printing process.

Highly recommended