BlueCast X5 LCD/DLP Castable Resin

X5 LCD / DLP RESIN

Fully compatible with all LCD printers like WANHAO D7. MICROMAKE 2017 L2. XAYAV Model V. etc? (405nm _ min. 30 watt LED power)

Washing mode: Ethyl / IPA alcohol?

UV care: Not needed

Shrinkage: Minimum

Color: Light Blue

Primercat: Suggested

Size: 500 gr

?

?BLUE CAST X5 FOR LCD/DLP 3d PRINTERS
– Custom synthesized oligomer by BlueCast. not available to market. patent is going to be applied.

– Excellent casting of small engravings both positive and negative

– Fits all jewelry needs from filigree to medals as well dental one

– Excellent for stones presetting

– Curing triggering tuned to maximize antialias smoothing

– No monomer inside. no smell

– No aggression on plastic parts (tested on PS. PMMA)

– No postcuring needed for casting

– No shrinkage

– Easy welding with wax. forget about pattern lost into investment

– Can be polished. engraved. drilled (postcure is needed)

– Low viscosity. easier to recover uncured resin from models. easy to wash

– No preheating required

– Very little hygroscopic while liquid. no water absorption while printed

– Atoxic. solvent free. very low phospine content. very low skin irritant

– Cleaner burnout. 0.00% ash residual

– Suitable for fast burnout

– Full burnout also at lower temperature (750 C )

– No expansion during burnout. sublimation starts at 130 Celsius

– Excellent dimensional stability in time. no need to stock in cold/dark places

?

Instructions

MSDS