Creality Space Pi Plus Filament Dryer + 4kg Creality Hyper PLA-CF Filament – 1kg Purple + 1kg Greyish Yellow + 1kg Dark Green + 1kg Ochre

Highlights

Why Creality Space Pi Plus filament dryer

The Creality Space Pi Plus filament dryer dries the filament while printing, preventing moisture absorption due to external environmental conditions. This helps avoid issues like stringing, clogging, poor adhesion, and layer shifting, ensuring high-quality results.

• 2 Rolls of filament can be dried simultaneously
• Compatible with 1.75mm and 2.85mm filaments
• Supports high-speed 3D printers and filaments from the Hyper series (recommended)
• Easy switching between C and F
• Safety through the power switch
• Moisture-proof silicone plug
• Double compartment for desiccants for drying when switched off
• Input voltage of 220V 50/60Hz, rated power of 260W

Two Rolls Capacity Design

It contains 2 rolls of 1 kg filaments and is also equipped with 4 filament holes and PTFE pipes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time.

PTC 360-Degree Hot-Air Heating

The dryer quickly heats with a built-in fan, circulating hot air 360 degrees for uniform heating, effectively drying moisture filaments and improving printing results.

Advanced PTC Heating Technology

Our filament dryer employs a unique 110W PTC heater to warm up the space, a feature that sets us apart in the market. Unlike most filament dryers that use a PI heating pad and often result in uneven drying, our model with the PTC heater ensures uniform drying. This PTC heater is not only durable and energy-saving but also eco-friendly.

LCD Touch Screen

The Creality Space Pi Plus Filament Dryer comes with a 4-inch touch screen for easy operation, making it simple for you to track drying conditions.

One-key Set for Filaments

It has one-key temperature settings for different filament types, supporting up to 12 kinds of filaments, including common and high-performance composites like PLA-CF, PA-CF, and ASA. Of course, you can also freely adjust the temperature between 45 Celsius and 70 Celsius.

48 Hours Timer Function

The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.

Parameter Power-off Memory Function

After a power outage, the machine can restart and still remember your previous material and temperature settings, eliminating the need for resetting and allowing for quick drying.

Specification