TH Board Set V9 (Dual Red Laser) – X1 Series

TH Board Set V9 (Dual Red Laser) – X1 Series

Overview

A set of circuit boards installed on the printer’s toolhead.

Important to know

• There is no difference in functionality between the Dual Red Laser version and the Single Red Laser version.
• The Single Red Laser TH board is discontinued and has been replaced by the Dual Red Laser TH board.
• The Dual Red Laser TH board works with the Dual Red Laser LIDAR.

Installation:

Before ordering the TH board or micro lidar for X1C/X1. please determine their versions to avoid the wrong version. which results in compatibility issues.

• If the Micro Lidar SN starts with 00ExxB. it means that the lidar is a dual red version. and the TH board should also be a dual red version with a serial number SN starting with 003xxC. 003xxD. or 003xxY.
• If the Micro Lidar SN starts with 00ExxA. it means that the lidar is a single red version. and the TH board should also be a single red version with a serial number SN starting with 003xxA or 003xxB.

In The Box

• 1 X TH Board Set V9 (Dual Red Laser)
• 1 X TH Board FPC Cable
• 1 X Extruder TH Board V9
• 4 X M1_6-4
• 1 X Glue

Compatibility:

X1 and X1C (not for X1E)

Product Specifications

Manufacturer Number: DLB014